QED QE-3212 REFERENCE DIGITAL AUDIO 40 COAXIAL KABLO 1mt.
![QED QE-3212 REFERENCE DIGITAL AUDIO 40 COAXIAL KABLO 1mt. QED QE-3212 REFERENCE DIGITAL AUDIO 40 COAXIAL KABLO 1mt.](https://eltelektronik.com/image/cache/catalog/urunler/Qed/dijital/qe3210_3212_coax-1000x1000.jpg)
QED QE-3212 REFERENCE DIGITAL AUDIO 40 COAXIAL KABLO 1 mt.
Referans Dijital 40, S / PDIF sinyallerinin maksimum aktarımı için gereken kesin karakteristik empedansı elde etmek için dikkatle tasarlanmıştır. Gümüş kaplama iletkenler, yüksek frekanslar için düşük dirençli bir yol sunar ve QED "Digiloc" fişleri, kablonun karakteristik empedansına daha yakındır ve geleneksel RCA fişlerine kıyasla 1dB'ye kadar geri dönüş kaybını azaltır. Bu, optimum sinyal aktarımı ve ses sinyalinin gelişmiş mikro-zamanlamasını sağlar.
REFERENCE DIGITAL AUDIO 40, THE NEW STANDARD FOR DIGITAL COAXIAL S/PDIF SIGNALS.
Reference Digital Audio 40 utilises a carefully engineered geometry to achieve the precise characteristic impedance required for the maximum transfer of S/PDIF signals. Silver plated conductors deliver a low resistance path for high frequencies and QED "Digiloc" plugs more closely match the cable's characteristic impedance, reducing return loss by up to 1dB when compared to conventional RCA plugs. This ensures optimal signal transfer and improved micro-timing of the audio signal.
JUST LISTEN
Silver plated signal carriers, effective high quality shielding and impedance matched cordage and plugs all combine to create audible sonic improvements when compared to the competition
TRIPLE LAYER ELECTROMAGNETIC SHIELDING
Through the use of factory controlled geometry and low permittivity foamed polyethylene dielectrics, Reference Digital Audio 40 maintains the correct characteristic impedance to match the transmission line between digital source and sink precisely. This makes for a very low jitter signal transfer which, listening tests have shown, leads to clearly audible sonic improvements.
75 OHM IMPEDANCE MATCHED DIGILOCTMRCA PLUGS
Domestic S/PDIF interfaces use the traditional RCA phono connector which is not impedance matched to the 75 Ohm transmission line. This causes measurable insertion loss and an increase in jitter due to signal reflections at the connector boundaries. The all new Digiloc RCA plugs are more closely impedance matched than ever before and measurements have shown, reduce insertion loss by up to 1.2 dB compared to ordinary RCA plugs.
ULTRA LOW JITTER
Jitter is the undesired deviation from true periodicity of an assumed periodic signal in electronics and telecommunications, often in relation to a reference clock source. A cable displaying ultra low jitter has been measured at
typically 30ps.